48-port Gigabit Ethernet Data Switch Cisco C9200L-48T-4G-E
- C9200L-48T-4G-E is the Catalyst 9200L 48-port Data 4x1G uplink Switch, with Network Essentials software. Cisco Catalyst 9200 Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified.
- Catalyst 9200L 48-port data, 4 x 1G, Network Essentials.
- Downlinks total 10/100/1000 or PoE+ copper ports: 48 ports data.
- Uplink configuration: 4x 1G fixed uplinks.
- Default primary AC power supply: PWR-C5-125WAC.
- Fans: Fixed redundant.
- Software: Network Essentials.
- Stacking bandwidth: 80 Gbps.
- DRAM: 2 GB.
- Flash: 4 GB.
- Switching capacity: 104 Gbps.
- Forwarding rate: 154.76 Mpps.
- Chassis Dimensions: 4.4 x 44.5 x 28.8 cm.
- Weight: 4.35 Kg.
Specification
Model |
C9200L-48T-4G-E |
Downlinks total 10/100/1000 or PoE+ copper ports |
48 ports data |
Uplink configuration |
4x 1G fixed uplinks |
Default primary AC power supply |
PWR-C5-125WAC |
Fans |
Fixed redundant |
Software |
Network Essentials |
Chassis Dimensions |
4.4 x 44.5 x 28.8 cm |
Weight |
4.35 Kg |
Virtual Networks |
1 |
Stacking bandwidth |
80 Gbps |
Total number of MAC addresses |
16,000 |
Total number of IPv4 routes (ARP plus learned routes) |
11,000 (8,000 direct routes and 3,000 indirect routes) |
IPv4 routing entries |
3,000 |
IPv6 routing entries |
1,500 |
Multicast routing scale |
1,000 |
QoS scale entries |
1,000 |
ACL scale entries |
1,500 |
Packet buffer per SKU |
6 MB buffers for 24- or 48-port Gigabit Ethernet models |
Flexible NetFlow (FNF) entries |
16,000 flows on 24- and 48-port Gigabit Ethernet models |
DRAM |
2 GB |
Flash |
4 GB |
VLAN IDs |
1024 |
Total Switched Virtual Interfaces (SVIs) |
512 |
Jumbo frames |
9198 bytes |
Switching capacity |
104 Gbps |
Forwarding rate |
154.76 Mpps |
Mean time between failures (hours) |
508,700 |
- Bảo hành: 12 tháng.