Wireless Accesst Point Meraki CISCO MR62
- Rugged/outdoor WLAN, outdoor campuses, industrial, 1 x 802.11b/g/n radio, 300 Mbit/sec max rate, 2x2 MIMO, beamforming, 1×Gigabit Ethernet port, Priority Voice (802.11e/WMM), Basic mesh.
- Ideal for harsh outdoor and industrial indoor environments.
- Single radio 802.11n with up to 300 Mbps throughput.
- Focused sector coverage with optional panel antennas.
- Self-healing mesh routing.
- Layer 7 application fingerprinting and QoS.
- Built-in enterprise security, guest access, and NAC.
- Self-configuring, plug-and-play deployment.
- Automatic cloud-based RF optimization with spectrum analysis.
- Real-time WIPS with Air Marshal.
Specification
| Radio |
2.4 GHz 802.11b/g/n radio
Max data rate: 300 Mbit/s
2.4 GHz 26 dBm peak transmission power
Max transmission power is de |
| 802.11n Capabilities |
2 x 2 multiple input, multiple output (MIMO) with two spatial streams
Maximal ratio combining (MRC)
Beamforming
Packet aggregation
Cyclic shift diversity (CSD) support |
| Power |
Power over Ethernet: 24 - 57 V (802.3af compatible)
Power consumption: 6.5 W max
Power over Ethernet injector sold separately |
| Mounting |
Mounts to walls and horizontal and vertical poles
Mounting hardware included |
| Physical Security |
Security screw included |
| Environment |
Operating temperature: -4°F to 122°F (-20°C to 50°C)
IP67 environmental rating |
| Physical Dimensions |
10.5” x 7.6” x 2.2” (267mm x 192mm x 57mm)
Weight: 1.5 lb (680g) |
| Interfaces |
1x 100/1000 Base-T Ethernet (RJ45) with 48V DC 802.3af PoE
Two external N-type antenna connectors |
| Security |
Integrated policy firewall (Identity Policy Manager)
Mobile device policies
Air Marshal: Real-time WIPS (wireless intrusion prevention system) with alarms
Rogue AP containment PCI compliance reporting
Guest isolation
WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X
TKIP and AES encryption
VLAN tagging (802.1q) |
| Quality of Service |
Wireless Quality of Service (WMM/802.11e)
DSCP (802.1p) |
| Mobility |
PMK and OKC credential support for fast Layer 2 roaming
L3 roaming |
| LED Indicators |
4 signal strength
1 Ethernet connectivity
1 power/booting/firmware upgrade status |
| Regulatory |
FCC (US), IC (Canada), CE (Europe), C-Tick (Australia/New Zealand), Cofetel (Mexico), TK (Turkey), RoHS |
| Mean Time Between Failure (MTBF) |
450,000 hours |
- Bảo hành: 12 tháng.
Cộng đồng Divivu
Diễn đàn hỗ trợ
Tin tức - Sự kiện
Tạo website
Hộp thư
Tài khoản chính
Tài khoản thưởng
Lịch sử mua hàng
Xem giỏ hàng
Thực hiện thanh toán
Điều khoản sử dụng
Đăng ký thành viên
Quản trị gian hàng
Quy trình mua bán hàng
Liên hệ 
Divivu Yahoo
Divivu Skype
Đơn giá bán:
