Hardware Specifications |
10/100Mbps Copper Ports |
8 10/100BASE-TX RJ45 Auto-MDI/MDI-X ports |
Gigabit Copper Ports |
2 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X ports |
SFP/mini-GBIC Slots |
2 1000BASE-X SFP interfaces, shared with Port-9 to Port-10 |
Switch Architecture |
Store-and-Forward |
Switch Fabric |
5.6Gbps / non-blocking |
Throughput |
4.16Mpps@64Bytes |
Address Table |
4K entries, automatic source address learning and ageing |
Shared Data Buffer |
2.75Mb embedded memory for packet buffers |
Flow Control |
IEEE 802.3x pause frame for full-duplex |
Back pressure for half-duplex |
Maximum Transmit Unit |
1536 Bytes |
Reset Button |
< 5 sec: System reboot |
> 5 sec: Factory default |
Dimensions |
330 x 155 x 43.5 mm, 1U height |
Weight |
1.5kg |
LED |
System: |
Power (Green) |
10/100BASE-TX RJ45 Interfaces (Port1 to Port8): |
10/100Mbps LNK/ACT (Green) |
PoE In-Use (Orange) |
10/100/1000BASE-T RJ45 / SFP Interfaces (Port 9 to Port10): |
LNK/ACT (Green) |
100/1000 (Green) |
PoE Usage |
30W, 60W, 90W, 120W (Orange) |
Cable |
Twisted-Pair |
10BASE-T: 2-Pair UTP CAT. 3, 4, 5, up to 100 meters |
100BASE-TX: 2-Pair UTP CAT. 5, 5e up to 100 meters |
1000BASE-T: 4-Pair UTP CAT. 5e, 6 up to 100 meters |
Fiber-Optic Cable |
1000BASE-SX : |
50/125μm or 62.5/125μm multi-mode fiber optic cable, up to 550m (varying on SFP module) |
1000BASE-LX : |
9/125μm single-mode fiber optic cable, up to 10/20/30/40/50/60/70/120 kilometers (varying on SFP module) |
Power Requirements |
100~240V AC, 50/60Hz, 2A |
Power Consumption |
Max. 150 watts / 511BTU |
ESD Protection |
Contact Discharge 8KV DC |
Air Discharge 8KV DC |
Power over Ethernet |
PoE Standard |
IEEE 802.3af / 802.3at PoE / PSE |
PoE Power Supply Type |
End-span |
PoE Power Output |
Per Port 52V DC, Max. 30.8 watts |
Power Pin Assignment |
1/2(+), 3/6(-) |
PoE Power Budget |
125 watts (max.) |
PoE Ability |
PD @ 7 watts 8 units |
PD @ 15.4 watts 8 units |
PD @ 30.8 watts 4 units |
Layer 2 Functions |
Port Management |
Port disable / enable |
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection |
Flow Control disable / enable |
Bandwidth Control / Broadcast Storm Control |
Port Status |
Display each port’s speed duplex mode, link status, flow control status, auto negotiation status |
Port Mirroring |
TX / RX / Both |
Many-to-1 monitor |
VLAN |
802.1Q tagged-based VLAN, up to 30 VLAN groups, out of 4094 VLAN IDs |
Port-based VLAN, up to 10 VLAN groups |
MTU VLAN |
QoS |
Allow to assign low / high priority on each port |
First-In-First-Out, All-High-before-Low, Weight-Round-Robin QoS policy |
Security |
Control MAC address binding |
TCP & UDP Filter |
Spanning Tree Protocol |
STP, IEEE 802.1D Spanning Tree Protocol |
RSTP, IEEE 802.1w Rapid Spanning Tree Protocol |
Link Aggregation |
2 groups of 4-Port 10/100BASE-TX trunk supported |
1 group of 2-Port 10/100/1000BASE-T trunk supported |
DHCP Relay |
DHCP Relay Agent / DHCP Relay Server |
PoE Setting |
PoE Status / PoE Port Setting / PoE Sequential |
Configuration Back / Restore |
Configuration backup / restore through Web interface |
IGMP Snooping |
IGMP (v1 / v2) Snooping, up to 32 multicast groups |
Management Functions |
Basic Management Interfaces |
Web browser, SNMP v1 / v2c |
Standards Conformance |
Regulation Compliance |
FCC Part 15 Class A, CE |
Standards Compliance |
IEEE 802.3 Ethernet |
IEEE 802.3u Fast Ethernet |
IEEE 802.3ab Gigabit Ethernet |
IEEE 802.3z Gigabit Ethernet |
IEEE 802.3x Full-duplex flow control |
IEEE 802.1Q VLAN |
IEEE 802.1p QoS |
IEEE 802.1D Spanning Tree Protocol |
IEEE 802.1w Rapid Spanning Tree Protocol |
IEEE 802.3af Power over Ethernet |
IEEE 802.3at Power over Ethernet Plus |