Patch cord Dintek CAT.6 UTP (0.5m-1m-2m-3m-5mét)

-         Part number: 1201-04xxx.

-         Patch Cord UTP Cat.6, 2 đầu đúc RJ45.

-         Màu: Vàng, Xám, Xanh dương. 

-         DINTEK PowerMAX Category 6 Patch Cords are specifically designed to support high speed data networks for 1000mb applications, and are fully tested to meet TIA/EIA Category 6 channel requirements. 

-         The patch cables are made from high quality shielded four pair 24AWG stranded wire.

-         DINTEK PowerMAX Category 6 Patch Cords are pre-terminated with RJ45 plugs and feature anti-snag strain relief boots. DINTEK recommends the entire range of PowerMAX UTP products be used in a end-to-end system to maximize cabling performance.

FEATURES

-         Molded boots prevent pin from bending and cables from kinking

-         24AWG stranded wire provides maximum flexibility

-         Brilliant colors make management a snap

-         Fully tested to meet ANSI/TIA-568-C.2 category 6 requirement

-         The various colors are available to meet TIA/EIA-606 standards

-         The mechanical characteristics and transmission performance meet 16Mbps token Ring,10Base-T,100Base-T,155Mbps,622Mbps ATM,Gigabit-Ethernet and 1.2Gbps ATM requirements.

PHYSICAL CHARACTERISTICS 

-         Twisted pair color code:
         Pair 1> blue, white/blue ring.
         Pair 2> orange, white/orange ring
         Pair 3> green, white/green ring
         Pair 4> brown, white/brown ring 

-         Conductor: 24AWG (7x0.195mm) stranded anneal copper wire

-         Insulation material: HDPE

-         Diameter of dielectric core: 1.0±0.05mm

-         Insulation thickness: min at any point: 0.20mm

-         Number of twist pairs: 4 pairs  •  Assembly: 4 pairs of dielectric core shall be stranded in circular form  •  Material of jacket: PVC/LSZH  •  Thickness of jacket: AVG 0.66~0.70mm  •  Nominal O.D: 5.6±0.2mm  •  Jacket color: red,orange,yellow,green,blue,grey, etc

-         RJ45 plug:Housing>polycarbonate

-         Contact>copper alloy 50u” gold plated over nickel

-         Strength>20lbs. min

-         Durability>200 cycles min.

-         Insulation resistance: 500 megaohms min. Molded boots prevent pin from bending and cables from kink.

-         Wiring schemes: T568B

Applications 

-         Category 6  Products exceed all TIA  and ISO specifications for Category 5e/6 cabling systems and components

-         They have been Independently  confirmed for system performance

-         Meets FCC parts 68

-         ANSI/TIA-568-C.2

-         ISO/IEC 11801

-         DINTEK  Cat 6 products can  be warranted for 25 years

-         Cat6  products are Interoperable  with DINTEK and other standards  compliant products

-         Independently been confirmed for  Gigabit Ethernet applications

-         Having a single vendor solution  ensures best system performance

-         Our products meet or exceed  performance requirements for  existing and proposed high-speed  network applications including:

-         Voice; T1; ISDN

-         10BASE-T (IEEE 802.3)

-         16Mbps Token Ring (IEEE802.5) 

-         100VG-AnyLAN (IEEE802.12)

-         100BASE-T Ethernet (IEEE802.3)

-         155/622Mbps 1.2/2.4 Gbps ATM

-         1000Mbps Gigabit Ethernet

-         550MHz Broadband Video

STANDARDS

-         UL Verified

-         ISO/IEC11801 2nd edition

-         ANSI/TIA-568-C.2

-         CENELEC EN 50173

-         LSZH Flame test as per IEC 60332-1

-         Sản xuất tại Taiwan.