Addressable Input Module GST I-9300

- I-9300 Addressable Input Module is used to receive normally open or normally closed control signals from interfaced equipment, and transmit the messages back to fire alarm control panel. The units ideal for use in water flow indicator, pressure switch, position switch, signal valves and external interface devices. When these devices operate, the output signal can be transmitted to fire alarm control panel via the module through the fire alarm loop to generate alarm, and activate other relevant devices. 

- Monitors switch contacts of remote equipment.

- Monitored cable.

- Programmable Inputs (NO/NC).

- Loop powered.

- Electronically addressed.

- LED status indicator.

- First fix base for easy and safe installation.

Thông số kỹ thuật

- Test Standard: CEA-GE1.084:200.

- Protection rating: IP32.

- Approval: LPCB, CE.

- Input: programmable NO/NC.

- Operating voltage: 24Vdc Loop voltage;

- Operating Current: Monitoring current: 1mA;

                     Action Current: 5mA.

- Operating temperature: -10°C to +55°C.

- Relative humidity: 95%.

- EOL Resistor : 4.7 K ohms.

- Addressing: 242 using P-9910.

- Application: Indoor use.

- Visual Indicator: LED, steady red when in alarm state, 3 sec interval blinking at normal state; Yellow (fault).

- Material and colour: ABS, off-white.

- Wiring: 1 pair non polarized.

- Dimensions: 120 x 80 x40 mm.

- Bảo hành: 12 tháng.