Công tắc cảm ứng hiện diện THEBEN ECO-IR 360C NT

-         Tắt/bật đèn ống và ĐHKK theo sự hiện diện và độ sáng (tự nhiên)

-         Gắn trần chìm trong nhà (IP40).

-         Tầm quét 8x8m/11x11m (ngồi/đi).

-         Kênh 1: xung (0,5s), 10s -20 min (tắt trễ), tự điều chỉnh.

-         Kênh 2: 10s~120min/0s~10min (tắt/bật trễ).

-         Nối với cảm biến hoặc công tắc ngoài để điều khiển thủ công.

-         Hoạt động song song.

-         Chế độ tự động và bán tự động.

-         Hạn dòng đối với chấn lưu.

-         Chế độ phòng/hành lang

Features

-         Presence detector (PIR)

-         Square detection area

-         Genuine daylight measurement

-         Light switch output (relay, 230 V)

-         Presence switch output (relay, potential-free)

-         Automatic control of lighting and HVAC as well as room monitoring function

-         Lighting control with light threshold value and self-learning swich-off delay

-         Choice of fully or semi automatic operation

-         Sensor or switch options for manual switching

-         Pulse function for staircase time switch

-         Inrush current limitation for EB

-         HVAC control with switch-on and swich-off delay

-         Room monitoring with selective movement detection

-         Fully or semi-automatic: In 'Fully automatic' mode, the lighting switches on and off automatically according to presence and light. In 'Semi-automatic' mode, it must be switched on manually and it switches off automatically

-         Manual override: The lighting can be manually switched on or off at any time via sensors or switches

-         Room/corridor sensor function: In the 'corridor' setting, the detector functions as a staircase time switch and it cannot be switched off manually

-         The pulse function is for controlling a staircase time switch

-         The inrush current limitation makes the presence detector particularly suitable for switching electronic ballasts (EBs)

-         The presence detector has 'Genuine daylight measurement' and is only suitable for switching fluorescent lamps (FL/PL)

-         Presence switch contact for HVAC control: The switching behaviour of the potential-free contact is only controlled by presence

-         The switch-on delay prevents instantaneous switch on. The contact only closes on completion of the switch-on delay

-         The sensitivity of the presence switch output is reduced in the 'monitoring' position. The contact indicates the presence of people with a high degree of certainty

-         Master/slave parallel switching: Up to ten detectors can be connected with each other to extend the detection area. The master switches the load. All other detectors merely provide presence information as slaves

-         Device can be connected as master or slave

-         Test operation mode checks the detection area and installation

-         A maximum of 10 detectors can be switched at the same time

-         The switching behaviour of the presence detector is controlled by presence and light

-         The self-learning switch-off delay adjusts to occupants' behaviour

-         The square detection area allows accurate and simple planning

Specifications

-         Hãng sản xuất THEBEN của Đức.

-         Bảo hành: 12 tháng.