Dual-Band Ceiling-Mount Wireless Access Point DrayTek Vigor AP912C
- Access Point ốp trần 802.11ac Dual-Band, AC1200 Wave 2 MU-MIMO.
- Hỗ trợ 1 cổng Gigabit Ethenet LAN, RJ-45.
- Sử dụng công nghệ MU-MIMO, với anten ngầm cung cấp hai băng tần 2.4GHz và 5HGHz.
- Hỗ trợ cấp nguồn qua Ethernet PoE giúp việc triển khai lắp đặt sẽ đơn giản hơn.
- Chịu tải tối đa 256 user (128 user mỗi băng tần).
- Hỗ trợ tạo tối đa 8 SSID (4 SSID mỗi băng tần).
- Công nghệ Mesh cho phép mở rộng vùng phủ sóng wifi dễ dàng.
- Roaming cho phép người dùng di chuyển mà không lo mất kết nối Wifi.
- Sử dụng chuẩn bảo mật WPA3-Personal.
- Giới hạn băng thông cho User/SSID.
- Tối ưu hóa băng thông với Airtime Fairness, cho phép giới hạn số client kết nối.
- Tích hợp Radius Server, giới hạn khách hàng, lưu lượng truy cập, kiểm soát thời gian kết nối, quản lý thiết bị...
- Hỗ trợ nhiều chế độ: Repeater, WDS...
- Cho phép quản lý, cấu hình qua ứng dụng DrayTek Wireless.
- Cho phép quản lý tập trung qua APM, VigorConnect, VigorACS2...
- Thiết kế hiện đại, sang trọng phù hợp cho không gian văng phòng, khách sạn nhà hàng...
Đặc tính kỹ thuật
  
| Model | 
Vigor AP912C | 
| Physical Interfaces/Controls | 
- 1 x Gigabit Ethernet LAN Port, RJ45 (accepts PoE Power)  - Factory Reset Button (recessed)  - DC Power Socket  - 1 x Security Lock | 
| Wireless Performance | 
- AC1200 Class Wireless Access Point  - 5GHz: PHY Rate 866Mb/s  - 2.4GHz: PHY Rate 300Mb/s | 
| Wireless LAN Compatibility | 
- IEEE 802.11ac (Wave 1 & 2)/a/b/g/n  - Frequency Band 2.4 GHz & 5.8Ghz – Simultaneous Operation  - Up to 128 clients per radio | 
| 2.4GHz Wireless LAN Features | 
- 802.11b, 802.11g, 802.11n  - 20 MHz/40 MHz  -  Up to 300Mb/s total Wi-Fi throughput (PHY Rate): 802.11b/g/n: 300Mb/s PHY rate (150Mb/s per Spatial Stream) | 
| 5Ghz Wireless LAN Features | 
- 802.11ac (Wave 1 & 2)/ 802.11n/ 802.11a  - 20 /40 /80 MHz  - Extended 5Ghz Band - Channels 36-48, 52-64, 100-140  - DFS/TPC Support  - Multi-User MIMO  - Up to 866Mb/s total Wi-Fi throughput (PHY Rate):     + 802.11a/n: 300Mb/s PHY rate (150Mb/s per Spatial Stream)     + 802.11ac: 866Mb/s PHY rate (433Mb/s per Spatial Stream) | 
| Security Features | 
- Wireless Encryption: WPA2/WPA3- also supports WPA/WEP (Not recommended)  - Built in 802.1x server (PEAP/EAP-TLS)  - 802.1x RADIUS Proxy (PEAP/EAP-TLS)  - PMK Caching & Pre-authentication  - Wireless Client Isolation  - Control Isolation of 2.4GHz and 5GHz bands  - Hidden SSIDs (Selectable)  - WPS - WiFi Protected Setup  - MAC Address Filtering (ACL) - Up to 256 entries  - Mobile Device Management  - EAPOL Key Retry - Disable EAPOL Key Retry to protect unpatched WLAN clients from KRACK | 
| Wireless Control Features | 
- Wireless Client Status List in WUI  - Client Limit per radio  - Client Limit per SSID  - Up to four distinct SSIDs (for VLANs) for each frequency band  (2.4/5Ghz)  - MAC Cloning  - Built-in DHCP Server & DHCP Relay  - Trusted DHCP Server IP for WLAN - Only specifed DHCP server IP can assign IP addresses to WLAN clients  - 802.1q VLAN  - Station Control - Time limit wireless connectivity per Station (e.g.1 hour) & set allowed Reconnection time (e.g. 1 day)  - Device Object/Group Control - Schedule Internet access for individual devices or groups  - Airtime Fairness  - Band Steering  - AP-Assisted Client Mobility  - WMM (Wireless MultiMedia)  - Bandwidth Management (Per Station/ Per SSID) | 
| Diagnostic Features | 
- System Log  - Speed Test  - Traffic Graph  - Wireless LAN Statistics  - Interference Monitor - Built-in Site Surveyor  - Web Interface (HTTP/HTTPS)  - DHCP Client  - TR-069 Control (For VigorACS or other TR-069 platform)  - CLI (Command Line Interface) - Telnet  - Firmware upgrade by TR-069/HTTP  - Central AP Management (from compatible DrayTek router/ controller)  - SNMP v2, v2c, v3  - Management VLAN  - Configuration File Export (with password) & Import  - Wireless Auto On/Off  - Disable Wireless if VigorAP is unable to ping specified host | 
| Power Requirements | 
- Maximum Power Consumption: 10 Watt  - DC 12V via external 100-240v AC/DC PSU  - 802.3af PoE via LAN port. Requires PoE injector or a PoE switch  such as the VigorSwitch P2121  | 
| Environmental & Physical | 
- Operating Temperature: 0 ° C to 45 ° C  - Operating Humidity: 10% to 90% (Non-condensing)  - Physical Dimensions: 162mm (wide/diameter) x 42mm (high)  - Weight: 0.3kg  - Ceiling or Wall Mountable (requires rear cable entry)  - Pack Contents: VigorAP 912C wireless access point, Ceiling Mount Bracket, T-Rail Bracket & Screws, Quick Start Guide, Ethernet Cable | 
- Bảo hành: 2 năm.